The FloMax RPM500 (old # RPM300M) was designed for high-performance, racing and marine applications to provide superior fuel/water separation and fuel filtration at high fuel flows. Using the same design and high efficiency filtration technology available in the popular FloMax RPM300 series, the RPM500 goes a step further in providing additional water and debris holding capacity. Designed for use in gasoline, racing fuel, ethanol and methanol and can be installed on either the pressure or suction side of the fuel system.
Unique multiport fuel port design provides dual inlet and outlet ports which allows the utmost in installation flexibility. Solves fuel line routing problems and provides additional diagnostic ports, and the ability to add accessories like fuel pressure gauges, etc..
Easily replaceable FloMax 3 micron, spin-on filter incorporates a unique internal dual gasket/o-ring combination. The totally self-contained spin-on filter requires no messy and questionable canister cleaning, eliminates back flushing common with in-line filters and totally eliminates any chance of fuel system contamination. With the QuikSeal filter sealing system, there are no o-rings, gaskets or seals to leak or swell.
This system is ideal for racing where extra capacity is needed and is OE with several offshore, high-horsepower, race engine manufacturers.
- Ports: 4 multi-directional (2-IN & 2-Out) -12 AN (ORB) ports.
- Fuel Flow: 300 GPH
- Filtration efficiency: 579sq inches of 3 micron, water separating media
- Height: 8.00”
- Width: 3.75”
- Depth: 5.00”
- Weight: 45oz.
- Base / manifold mounting holes: 7/16"