Product Description
This listing is for a COMPLETE MSD Ignition System for your
Mopar Small Block 318-360 Chrysler/Plymouth/Dodge !
Great Drag Race Kit with 2-Step, Timing Retard and Start Retard!
Included is an MSD Digital 6 Plus Ignition Box (6520), Pro-Billet Distributor (8534), 8.5mm Super Conductor Wire Set (32749), and a Blaster SS Ignition Coil (8207). We've put together a complete kit to take the guess work out of choosing the right components for your performance Mopar Small Block.
Digital 6 Plus Ignition Box - Part #6520
Includes a Single Stage Timing Retard 0-9.9 Degrees - Great for Nitrous!
2-Step Rev Limiter
Start Retard Option for Locked Out Distributors
The MSD Digital-6 Plus Ignition Control combines terrific power, digital accuracy and great accessories making it ideal for street/ strip applications. For nitrous equipped cars, the Digital-6 Plus offers a step retard that will retard the timing when the N20 is activated. There is also a 2-step rev limiter for holeshot consistency and overrev protection. Accepts points, amplifiers and mag pickups on 4, 6 or 8-cylinder engines.
Pro-Billet Distributor - Part #8534
This is MSD's most popular performance distributor! The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500” steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSD’s adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application.
8.5mm Super Conductor Wire Set - Part #32749
The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12" length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD uses a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. These wires have a Multi-Angle bendable end at the spark plug. A coil wire is included as well.
Blaster SS Performance Ignition Coil - Part #8207
Don’t let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 volts!The secondary windings are wound on a segmented bobbin which reduces the chance of voltage breakdown between the primary and secondary windings. For more protection, these windings are encased in a polyurethane compound for complete protection against vibration. The Blaster SS features brass terminals and a sturdy Rynite housing. It is supplied with a 90° boot, terminal and vibration mounts. A great addition to CD Ignitions and some stock applications.
