1646 results for moroso oil

Moroso 20143 Street/Strip Oil Pan - LS Engines - GM A/F/X/G Body & Corvette/

Chevrolet LS Series, Engine Conversion Race Baffled, Angled Sump, Fully Fabricated Steel Oil Pan Wet Sump, 7 Quart Capacity, 6" deep Fits: GM LS, Engine Conversion...

Moroso 85471 Vacuum Pump System Air-Oil Separator/Fill Tank - 12AN Fittings

Air-Oil Separator/Fill Tank Use this tank as a remote Air/Oil Separator and Fill on Vacuum Pump Systems Moroso Vacuum Pump Air-Oil Separator is designed to be plumbed between the valve cover...

Moroso 20403 Street/Strip Oil Pan - Big Block Chevy - 7 Quart - Baffled 8" Deep

Fits:Most chassis except 1962-'67 Chevy II, V8 Vega/Monza and 1955-'57 Chevy. Oil Pan, Steel, Clear Zinc, Street Performance, Deep Sump. Engine Application: Mark IV style (except Gen V...

Moroso 26217 Adjustable Distributor Collar - MSD/Moroso/ 1.25" Housing - Black

Adjustable Distributor Collar Precision machined steel collar can be positioned on distributor housing to adjust installed height for dead-center gear alignment Also...

Moroso 97001 Oil Pan Drain Plug - Magnetic - 1/2"-20 Thread - Zinc Plated

Oil Pan Drain Plug. Clear Zinc. Includes Nylon Washer 3/4" hex head with 1/2" x 20 threads Replacement for Moroso Oil and Transmission Pans and others Extra strength, rare earth...

Moroso 25971 Flexible Braided Oil Dipstick Kit - Use W/ Moroso Pans 1/4" NPT

Oil Pan Dipstick, Flex Tube, Stainless Steel, Universal Oil Pan Dipstick features braided stainless flex tube with 1/4" NPT fitting and a machined aluminum handle ...

Moroso 63917 Vacuum Pump Mounting Bracket - Moroso Enhanced Pumps - Chevy V8

Vacuum Pump Mounting Bracket, Mounts Moroso Enhanced Design Vacuum Pumps Part Nos. 22642, 22644, 22840 and 22842 to driver or passenger side cylinder heads on a SBC or BBC or to any...

Moroso 25973 Twist-Lock Oil Dipstick Kit - Use W/ Moroso Pans 1/4" NPT

Universal Dipstick Kit, Twist Lock Efficient twist-lock design eliminates oil leakage, blowing out of handle and prevents crankcase gasses from escaping In Dyno testing,...

Moroso 20413 Street/Strip Oil Pan - Gen V/Gen VI Big Block Chevy - 6 Quart - 8"

Fits:Most GM Chassis, most rear steering including 1964-'72 Chevelle, Cutlass, Skylark, Tempest/GTO. Oil Pan, Steel, Clear Zinc, Street Performance, Deep Sump, Core Based. Engine...

WIX Filters Racing Oil Filter - 51061R - Chevy Tall

Thread Size: 13-16-16 Filter Height: 5.17 Filter OD: 3.6 Media Type: HEE Flow Rate GPM: 28 Anti-Drain Back Valve: YES

Moroso 63840 Alternator Bracket - Big Block Chevy - Use W/ Vac & Oil Pump Drive

Alternator Mount Kit, Electric Water Pump, BBC Moroso has engineered Alternator Mount Kits and Alternator Drive Kits for popular engines using an electric water pump or electric...

Moroso 20511 Street/Strip Oil Pan - Ford 289/302/5.0L - 7 Quart - Mustang/T-Bird

Fits:1979-up Mustang, 1981-'88 Thunderbird & Cougar,1979-'86 Capri and other Ford rear sump applications. Now with billet end seals for greater sealing! Oil Pan, Steel,...

Moroso 97011 Replacement Oil Pan Drain Plug Washers - Teflon - 10 Pack - 1/2" ID

Replacement Drain Plug Washers, Nylon, Ten per Pack High quality washers ensure a leak-free seal 1/2" I.D. x 7/8" O.D. Fits Moroso Drain Plug No. 97000, No. 97001 and others

Moroso 97010 Replacement Oil Pan Drain Plug Washers - Copper - 10 Pack - 1/2" ID

Replacement Drain Plug Washers, Copper, Ten per Pack High quality washers ensure a leak-free seal 1/2" I.D. x 7/8" O.D. Fits Moroso Drain Plug No. 97000, No. 97001 and others

Moroso 23030 Louvered Windage Tray - Big Block Chevy - Teflon Coated

Louvered design allows oil thrown from rotating assembly to drain into sump without splashing back Teflon coated for quick drainage Improved drainage reduces windage,...

Moroso 63845 Vacuum Pump/Dry Sump Oil Pump Drive Mandrel Kit - Small Block Chevy

Vacuum Pump, Dry Sump Pump Kit, SBC, uses 4.75" mandrel length Extra long to accommodate any combination Steel, self-centering mandrel bolts directly to harmonic...

Moroso 99406 Vinyl Fender Cover - Black - 34" x 22" Moroso/Comp Engineering Logo

Fender Cover 34" x 22" Rubber cover printed with Moroso and Competition Engineering Logos Non-skid foam backing is safe for your car's finish and will not slide off while working...

WIX Filters Racing Oil Filter - 51069R - Chevy Short

WIX Filters Racing Oil Filter - 51515R - Ford/Chrysler -

Moroso 68812 Valve Cover Breather - Clamp On - 1.500" ID - Chrome - Half Hood

Valve Cover Filtered Breather, half-hood, clamp-on type. For Moroso Covers with welded-in stacks, 1-1/2" I.D. Provides maximum protection against dirt and airborne debris...

Moroso 63844 Vacuum Pump/Dry Sump Oil Pump Drive Mandrel Kit - Big Block Chevy

Vacuum Pump, Dry Sump Pump Kit, BBC, uses 5" mandrel length Extra long to accommodate any combination Steel, self-centering mandrel bolts directly to harmonic...

Moroso 23693 Oil Filter Sandwich Adapter - Ford/Chrysler - 10AN Ports

Universal Oil Cooler/Filter Adapter, 3/4"-16 thread and 2-5/8" O-ring Fits: Ford, Chrysler and 4 and 6 cyl. applications Mounts between spin-on oil filter and filter...

Moroso 62030 Coil-Over Shock Adjusting Spanner Wrench - Up to 3.25" Diameter Nut

Coil-Over Shock Adjusting Tool Makes adjusting coil-over shocks much easier than the commonly used hammer and screwdrier method Works with Moroso, Competition Engineering,...

Moroso 68810 Push-In Breather Kit - Open Element - Pair - For 1.22" Hole Covers

Push-In Filtered Breather Kit Kit allows engine builder to install filtered breathers on Moroso steel or aluminum valve covers (or other covers with 1.22" holes) without...

WIX Filters Racing Oil Filter - 51060R - Chevy w/ Antidrain

Moroso 68740 Push-In Valve Cover Breathers - Chrome - Fits 1.22" Hole - Pair

One Piece Push-In Valve Cover Breathers, Steel, Chrome Plated Fits: Moroso or any valve cover with 1.22" hole Designed to drain oil trapped in the foam back into the...

Moroso 71430 Replacement Quick Fastener Springs - .325" Tall - 1" Wide - 10 Pack

1" Wide Springs. Designed for use with Moroso’s flush, oval head and butterfly fasteners .325" Height Designed for use with Moroso's flush, oval head...

Moroso 23691 Oil Filter Sandwich Adapter/Bypass Eliminator Chevy 10AN Ports

Oil Filter Adapter, SBC & BBC Mark IV and Aftermarket Engine Blocks with a deep oil filter pocket, for plumbing a remote oil cooler for wet sump oiling systems. Lowers oil filter...

Moroso 85497 Universal Billet Aluminum Air Oil Separator/Catch Can - Black

Air-Oil Separator Universal Kit, Small Body, Black Finish This listing is for the BLACK catch can shown in the left of the picture. General Information *Please note: May not apply to all kits...

WIX Filters Racing Oil Filter - 51222R - 1 1/2 in.-12 Thread, 6.21 in. Height

Moroso 38541 Oil Pan Stud Kit - GM LS Engines - Hex Head Nuts

Oil Pan Stud Kit, GM LS Engines Designed to make pan installation easy and prolong gasket life Lock nuts feature attached washers with serrated faces to provide a positive...

Moroso 68816 Valve Cover Breather - Clamp On - 1.500" ID - Chrome - Open Element

Valve Cover Filtered Breather, clamp-on type. For Moroso Covers with welded-in stacks, 1-1/2" I.D. Provides maximum protection against dirt and airborne debris without...

Moroso 68781 Valve Cover Breather for Crankcase Evacuation - 3/4" Nipple Chrome

Replacement Breather/Oil Separator, 3/4" Hose, Chrome Fits: Moroso or any valve cover with 1.22" hole; includes rubber gromnet Is ideal for plumbing your...

Moroso 25000 Oil Return Screen Kit - Small Block Chevy - Traps Metal Fragments

Oil Return Screen Kit, Small Block Chevy. Includes 8 oil return hole plugs to redirect oil to front/rear return galleries. Includes filter screens and epoxy Inexpensive...

Moroso 68113 Chrome Plated Tall Valve Covers - Big Block Chevy - Pair Baffled

Stamped Steel Valve Cover, Chrome Plated, Tall, with Baffle, Moroso logo, BBC Includes two breather/filler cap grommets and one baffled and one non-baffled PCV grommet ...

Moroso 68813 Valve Cover Breather - Push-In For 1.22" Hole - Chrome - Half Hood

Valve Cover Filtered Breather, half-hood, push-In type. For Moroso Covers with 1.22" holes Provides maximum protection against dirt and airborne debris without restricting...

Moroso 74102 Battery/Alternator Disconnect Switch - 300 Amp - 2000 Amps Surge

Battery Disconnect Switch, Super-Duty Moroso's Super-Duty switch with rating of 2000 amps intermittent and 300 amps continuous is perfect for engines with large starter...

Moroso 64929 Replacement Carburetor Throttle Return Springs - Pair

Throttle Return Springs Pack of two stainless steel springs can be used as spares or replacements for Moroso Throttle Return Spring Kit Nos. 64925, 64926 and 64928

Moroso 68815 Valve Cover Breather - Clamp On - 1.375" ID - Chrome - Open Element

Valve Cover Filtered Breather, clamp-on type. For Moroso Covers with welded-in stacks, 1-3/8" I.D. Provides maximum protection against dirt and airborne debris without...

Moroso 68811 Valve Cover Breather - Clamp On - 1.375" ID - Chrome - Half Hood

Valve Cover Filtered Breather, half-hood, clamp-on type. For Moroso Covers with welded-in stacks, 1-3/8" I.D. Provides maximum protection against dirt and airborne debris...

Moroso 22010 Oil Galley Restrictors - Small Block/Big Block Chevy - Pair

Oil Restrictor Kit. SBC and BBC engines, .0625" orifice dia. 1/4” NPT Screws into existing lifter galley cleaning plug holes at back of block. Two per pack Reduces...

Moroso 68817 Valve Cover Breather - Push-In For 1.22" Hole - Chrome Open Element

Valve Cover Filtered Breather, push-In type. For Moroso Covers with 1.22" holes Provides maximum protection against dirt and airborne debris without restricting air flow ...

Moroso 23775 Oil Filter Bypass Eliminator- Chevy Small Block/Big Block - Billet

Oil Bypass Eliminator, SBC, BBC (except Gen V and Gen VI) Designed to eliminate the oil bypass found on Chevrolet engines Does not allow unfiltered oil back into the...

Moroso 62200 Oil Pump Primer Tool - For Chevrolet Small Block/Big Block/4.3L V6

Oil Pump Primer Fits: Most Chevrolet engines Used to build up oil pressure in a new engine before initial starting Remove the distributor and insert the primer to engage...

Moroso 68660 Valve Cover Oil Filler Cap - Chrome - Push-In - 1.25" Grommet

Oil Filler Cap Push-in design for applications requiring a sealing-type filler plug Chrome plated top section Fits 1.25" Valve Cover Hole

Moroso 85474 Universal Air-Oil Separator/Catch Can - Billet Aluminum 3/8" Hose

Air-Oil Separator Universal Kit, Large Body General Information *Please note: May not apply to all kits Plumbed into a vehicle's PCV system to capture the excess crankcase vapors, residual...

Moroso 23763 Remote Oil Filter Mount - For Chevy Style Filters - Billet 12AN

Billet Aluminum Remote Oil Filter Mount, Side Port Style Now accepts both Chevy style spin-on filters (13/16" -3-1/4" O-ring) and others with 3/4" -16 thread...

Moroso 71400 Replacement Quick Fastener Springs - .425" Tall - 1.375" W 10 Pack

1-3/8" Springs. Designed for use with Moroso’s flush, oval head and butterfly fasteners Designed for use with Moroso's flush, oval head and butterfly fasteners ...

Moroso 22651 Vacuum Pump Line Replacement 6ft Clear Hose

These vacuum pump lines are designed as replacements for those in your Moroso vacuum pump line kit. These lines are constructed from durable steel reinforced hose.

Moroso 97810 Replacement Weld In Evacuation Tube for Crankcase Evacuation Kit

These Moroso replacement weld-in nipple fittings are designed as replacements for the crankcase evacuation kits. They are made of steel and can be welded into any header collector.

Moroso 25001 Oil Return Screen Kit - Big Block Chevy - Traps Metal Fragments

Oil Return Screen Kit, Big Block Chevy. Includes filter screens and epoxy Inexpensive engine insurance! Traps metal fragments or loose components resulting from...

Moroso 68741 Push-In Valve Cover Breather - Chrome - Fits 1.22" Hole - Each

One Piece Push-In Valve Cover Breather, Steel, Chrome, Contains one breather with valve cover grommet and one PCV valve grommet Fits: Moroso or any valve cover with 1.22"...